Table of Contents
Advertisement
Smart codec
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
<Video & Audio (
2. Click <Smart codec>.
3. Set the image quality.
The ROI area will be displayed in the
specified quality.
4. Select a desired area with the mouse
pointer and drag it as much as you
want.
You can specify up to 5 distinct areas.
5. To cancel all the settings for the area,
click the [Clear (
6. When done, click [Apply (
M
When Video Output turns on, images cannot be seen in all preview windows except for DPTZ setup.
J
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 54)
)> tab.
)] button.
)].
English _75
Advertisement
Table of Contents
