Samsung SNB-9000 User Manual page 84

setup screen
SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
<Network (
2. Click <SSL>.
3. Select a secure connection system.

To access the camera using HTTPS mode, you
have to type the IP address for the camera in
the form of "https://<Camera_IP>".
If you failed to configure the Web viewer
settings in HTTPS mode with Internet Explorer,
edit the Internet options as follows: <Menu
 Tools  Internet Options  Advanced 
Security  Uncheck TLS 1.0, and check TLS
1.1, TLS 1.2>
4. Search for the public certificate that you want to install on the camera.
To install the certificate on the camera, you need to provide a certificate name (it
can be arbitrarily assigned by the user), certificate file issued from the certification
authority and a key file.

The <HTTPS (Secure connection mode using the public certificate)> item will be active only if
there exists a public certificate installed.
5. When done, click [Apply (
Installing the certificate
1. Enter the certificate name.
2. Click the [Browse (
be installed, and then click the [Install (
Deleting the certificate
1. Click [Delete (
2. To delete a public certificate, you should access the network video decoder in
the mode of <HTTP (Do not use secure connection)> or <HTTPS (Secure
connection mode using a unique certificate)>.
84_ setup screen
)> tab.
)].
)] button, select the public certificate file and key file to
)] button.
)] button.