Download  Print this page

Sanyo MCD-UB575M Instruction Manual page 9

Hide thumbs

Advertisement

Note:
-
Some MP3/WMA CDs cannot be played back
depending on the recording conditions.
-
The CD-R/RW that has no music data or non-
MP3/WMA files cannot be played back.
-
Do not make an empty folder. It may not work
correctly.
-
In this model, recommend recording setting is
128 kbps of fixing bit rate. If files are recorded
in other bit rate (for example: 320 kbps) or in
variable bit rate, track-jump may sometimes
happen according to recording conditions.
MP3 CD Play
1. Load the MP3 CD.(See page5)
The total number of files of the MP3 CD
appears on the display.
2. Press the PLAY/PAUSE i button to start
playback.
3. Press the MEMORY/FOLDER button,
"FOLDER" blinks on the display, then press
the f/FILE- or FILE+/e button (or the
FOLDER- or FOLDER + button on the remote
controller) to select the desired folder.
4. When the first file number of selected folder
appears press the f/FILE- or FILE+/e
button to select a desired file.
5. Press the PLAY/PAUSE i button to start
playback.
MP3
6. Press the STOP n button at any time to stop
the playback.
Note:
-
If there is no music data, "no" appears.
-
Only select the folder in playing mode.
PROGRAMMED PLAY
Up to 32 tracks on a disc can be programmed for
play in any order.
-
To begin the programming procedure, set
function to "CD/USB" first.
-
The same file can be programmed more than
once.
-
Load a disc that you want to programme before
starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the
"P01" and "MEMORY" appear briefly then
"
" appears and "MEMORY" blinks.
3. Select a file by using the f/FILE- or FILE+/e
button (or the FOLDER- or FOLDER + button
on the remote controller).
4. Press the MEMORY/FOLDER button, the
"P02" and "MEMORY" appear briefly then
"
" appears and "MEMORY" blinks.
5. Repeat steps 3-4 to programme additional
files.
6. Press the PLAY/PAUSE i button to start
playback. "P01" appears briefly, then first
programmed file appears and "MEMORY"
remains lit,
7. Press the STOP n button to stop programme
playback at any time.
To cancel programmed play, press the STOP n
button twice during playback.
Checking the programme
In stop mode when MEMORY remains lit press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new file to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
To change a file:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the file number to
be replaced is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
-8-
MEMORY
MEMORY
MEMORY
MP3

Advertisement

loading

  Also See for Sanyo MCD-UB575M

  Related Manuals for Sanyo MCD-UB575M