Maintenance; Cleaning The Unit; Specification - Sanyo MCD-UB575M Instruction Manual

Hide thumbs Also See for MCD-UB575M:
Table of Contents

Advertisement

Cleaning the tape heads
To ensure continued high performance, use a
cleaning tape (available from your local audio
dealer) to clean the head block of the deck after
about every 10 hours of use.

Cleaning the unit

Clean the outside of the unit with a clean soft
cloth, moistened with lukewarm water. Do not
use benzene, thinners, or alcohol for they may
mar the finish of the surfaces.
CD player
Channels:
2-Channel stereo
Sampling frequency:
44.1 KHz
Pick-up:
Semiconductor laser
Laser output:
0.6 mW (Continuous wave max.)
Wave length:
790 nm
Wow/Flutter:
Below measurable limits
Radio
Reception frequency:
FM: 87.5 - 108 MHz
AM: 526.5 - 1606.5 KHz
Cassette deck
Track system:
4-track, 2-channel stereo
Erasing system:
Magnet erase
Tape speed:
4.75 cm/sec.
Frequency response:
80 - 12,000 Hz
Fast forward/rewind time:
Approx. 110 sec. (C-60)

MAINTENANCE

Cleaning the CD player lens
The lens should never be touched. If dust is on
the lens, blow it off using a camera lens blower.
(Consult your dealer.)

SPECIFICATION

General
Output power:
2 W/ch (DC max.)
1.5 W/ch (AC max.)
Input:
USB: For USB memory device
Speakers:
10 cm x 2, 8 ohms
Terminals:
PHONES: 32 ohms
Power source:
AC: 230 ~ 240V, 50Hz
DC: 12V, 8 "D/HP2/R20" batteries
Dimensions:
410 (W) x 167 (H) x 286 (D) mm
Weight:
Approx. 2.8 kg (not including batteries)
Specifications subject to change without notice.
-12-

Advertisement

Table of Contents
loading

Table of Contents