Handle Removal; Reinstalling The Right (Refrigerator) Door; Reinstalling The Left (Freezer) Door - Kenmore 795.51022.001 Service Manual

Reinstalling the right (Refrigerator) door

(1)
(3)
Type 1
1. Place the door onto the lower hinge pin.
2. Fit top hinge (4) over hinge lever latch (5) into
place. Rotate lever (3) counterclockwise to secure
hinge.
NOTE: Regardless of hinge lever type. removal
process is the same.
3. Hook tab on switch side of corner under edge of wire
opening in cabinet top. Position cover (2) into place.
Insert and tighten cover screw (1).

Reinstalling the left (Freezer) door

(2)
(1)
(4)
(5)
(6)
(7)
Type 1
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge
NOTE: Regardless of hinge lever type, removal
process is the same.
3. Install the grounding screw (4) and connect all the
wire harnesses (3).
4. Hook tab on door switch side of cover (2) under edge
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
5. Reconnect the water tubes by inserting the tubes into
the connectors.
(2)
(3)
(4)
Rivet
(5)
(4)
(5)
Type 2
(3)
(7)
(5)
(6)
Rivet
Type 2

2. HANDLE REMOVAL

4
Identify you handle type
• Type 1
• Grasp the handle tigthtly with both hands and slide the
handle up (1) (this may require some force).
• The keyhole slots (2) on the back of the handle allow
the handle to separate from the mounting screws (3).
CAUTION: When trying to remove or install the handle
if hit wit a hammer, it could be damaged or broken.
CAUTION: When you assemble or dissasemble
handle, you must push and pull with moment force.
Screws
mounted
on door
- 13 -
Keyhole slots
on back of
handle