LEVELING THE REFRIGERATOR DOOR
Place level on top of the refrigerator as shown below.
If your refrigerator is not level, insert a flat blade screwdriver
into the grooves of the leveling legs (shown in picture below).
Rotate legs clockwise to raise or counterclockwise to lower the
front of the refrigerator.
Left leveling leg
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼"
(6.35 mm) to ½" (12. 7 mm) from front to back.
Then level the refrigerator from side to side.
REFRIGERATOR INSTALLATION
F
C
C
F
Right leveling leg
C
C
F
F
HANDLE REMOVAL
You may have to remove the door handles to move the
refrigerator through a narrow opening. See instructions below.
NOTE: To avoid damaging door surfaces when moving
the refrigerator through narrow openings, it is ALWAYS
recommended to remove the doors as instructed.
• Loosen the set screws with a
remove the handle.
NOTE: If the handle mounting fasteners need to be tightened
or moved, use a ¼" (6.35 mm) Allen wrench.
Mounting
fasteners
9
/
3
" (2.38 mm) Allen wrench and
32
Set screw
Allen Wrench