Lock Function (Dispenser And Display Button Lock); Filter Condition Display Function; Ultra Ice Selection; Dispenser Light - Kenmore 795.51022.001 Service Manual

1-4. Lock function (dispenser and display button lock)

1) When the refrigerator is first turned on, the buttons are not locked. The display panel shows the padlock unlocked icon.
2) To lock the display, the dispenser, and the control panel, press, and hold the LOCK button for 3 seconds. The locked
pad lock icon is displayed.
3) The LOCK button is the only control feature that remains active in the locked state. The buzzer sound, other control
buttons, and the dispenser are deactivated.
4) To release from the locked state, press and hold the LOCK button again for 3 seconds.
Ex) "LOCK" Ex) "LOCK"
Function ON
Function OFF

1-5. Filter condition display function

1) There is a replacement indicator for filter cartridge on the dispenser.
2) Water filter needs replacement once six months.
3) At initial power ON, filter indicator is OFF.
4) After six months, filter indicator turns ON to tell you need replace the filter as soon as possible.
5) Once that filter is replaced, press and hold 3 seconds the FILTER button to reset the filter indicator, then, filter
indicator turns OFF.
6) Indicator will turn ON after six months, when you need change the filter again.
In initial Power On Replace indicator
/ Filter RESET light on

1-6. ULTRA ICE selection

Please select this function for quick freezing.
This function automatically turns off after a preset time and must be selected each time for operation.

1-7. Dispenser Light

1) Normal status of dispenser light is OFF.
2) When dispenser pad is pressed, dispenser light turns ON.
3) Dispenser light will turns OFF immediately after dispenser pad is released.
- 24 -