Advanced Setup; Enabling The Remote Activation Function - D-Link DI-304 User Manual

Advanced Setup

This chapter explains the remaining options available in Advanced Setup:
Click Call Control and PPP/MP Setup to open the setup page displayed below.

Enabling the Remote Activation Function

Some applications require the router to be remotely activated, or dial up to the ISP
using the ISDN interface. For instance, if you are a user who accesses the Internet
via ISDN from home, usually the dialup connection is idle when you are not at
home. You may want to get some files from home while you are working in the
office. This function allows you to make a phone call to the router and ask it to dial
up to the ISP. Then you can access your home network to retrieve the files. Of
course, you have to have a fixed IP address and expose some internal network
resources, such as FTP, WWW etc.
Advanced Setup
>> Call Control and PPP/MP Setup
>> Call Schedule Setup
>> NAT Setup
>> Static Route Setup
>> IP Filter/Firewall Setup
47
DI-304/DI-304M ISDN Remote Router