Configuring The Tcp/Ip Protocol - D-Link DI-304 User Manual

Your particular system may differ from the window shown here. Check if you have
an Ethernet Network Interface card (NIC) installed. If not, refer to the installation
documentation from the NIC card manufacturer and install the card and drivers.
If you have installed the NIC card,

Configuring the TCP/IP Protocol

1. On the Network dialog box Configuration card, select TCP/IP and then click
Properties. The TCP/IP Properties dialog box will open.
1. Click the Add button. The Select Network Component
Type dialog box will open. This box has four options: Client, Adapter,
Protocol, and Service.
2. Select Protocol and click the Add button. The Select Network Protocol
dialog box will open.
3. Select Microsoft in the left scrolling window, then select TCP/IP on the
right, and click OK. It will return to the Network dialog box.
13
DI-304/DI-304M ISDN Remote Router