Lan-To-Lan Access - D-Link DI-304 User Manual

DI-304/DI-304M ISDN Remote Router

LAN-to-LAN Access

The following sections are based on the network layout above to describe how to set
up a LAN-to-LAN profile to connect two private networks. In the above network
layout, the private network of the head office is 192.168.1.0/24 and the off-site
branch office network is 192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you should
gather the information shown in the following table.
Router IP /Subnet mask
Assigned IP for dial-in
ISDN line number
Callback function
♦
Callback Number – If the previous option has been enabled, enter the
dial-in user's ISDN line number here.
♦
Check to enable Callback Budget Control – Enable the callback budget
control.
♦
Callback Budget (Unit: minutes) – By default, the callback function has
a 30-minute time restriction. The budget will be decreased automatically
per callback connection. Once the callback budget has been exhausted,
the callback mechanism will be disabled automatically.
Network ID
connection
Access Account
Head Office
192.168.1.0/24
192.168.1/24
192.168.1.200
UN: head; PW: head
1000
Disable
40
Branch Office
192.168.2.0/24
192.168.2.1/24
192.168.2.200
UN: branch; PW: branch
2000
Disable