What This Manual Covers - D-Link DI-304 User Manual

What This Manual Covers

This manual is divided into thirteen parts.
Regardless of the application, it is important that you follow the steps outlined in
Chapters 2, "Installation and Setup," to correctly connect your DI-304 to your LAN.
You can then refer to other chapters of the manual depending on your specific
installation requirements.
♦
Chapter One, "Introduction," describes many of the
technologies implemented in the DI-304 as well as product
features, etc.
♦
Chapter Two, "Installation and Setup," is designed as a step-
by-step guide to installing the router. In addition, descriptions
of the front panel and rear panel are provided.
♦
Chapter Three, "Basic Configuration and Internet Access,"
provides detailed explanations for basic setup and Internet
access setup. It also covers ISDN dial-up Internet access and
DSL/cable modem Internet access.
♦
Chapter Four, "Remote Access," provides an introduction to
remote access, including remote dial-in access and LAN-to-
LAN access.
♦
Chapter Five, "Advanced Setup," describes how to enable the
remote activation function, and configure the BOD
parameters, as well as information relating to NAT setup and
IP filter and firewall setup.
♦
Chapter Six,
explanations of online status and management setup, as well
as information pertaining to diagnostic tools and rebooting the
system.
♦
Appendix A, "Troubleshooting and FAQ," includes some of
the most Frequently Asked Questions.
♦
Appendix B, "Basic IP Concepts," contains a brief of some
fundamental IP concepts.
♦
Appendix C, "IP Protocol and Port Numbers," lists many
commonly used IP settings.
♦
Appendix D, "Technical Specifications," lists specifications
about the DI-304 ISDN router.
"System Management,"
5
DI-304/DI-304M ISDN Remote Router
gives detailed