PC Chips A41G V7.0 User Manual page 43

Motherboard User's Guide
The following Windows Setup screen appears:
Figure 1.11 Windows Setup—Selected SCSI Adapter
b Select "ATI AHCI Compatible RAID Controller-x86 platform" and press
Enter for 32-bit OS or Select "ATI AHCI Compatible RAID Controller-x64 plat-
form" and press Enter for 64-bit OS.
The following Windows Setup screen appears listing both drivers:
Figure 1.12 Windows Setup—AMD drives listed
Press Enter to continue with Windows XP Installation.
5
Be sure to leave the floppy disk inserted in the floppy drive until the blue screen
portion of Windows XP installation is completed, then take out the floppy.
Follow the instructions on how to install Windows XP.
6
After Windows XP is completely installed, it is recommended that you install the
ForceWare software in order to access the FastBuild RAID Management tool.
Each time you add a new hard drive to a RAID array, the RAID driver will
Note:
have to be installed under Windows once for that hard drive. After that,
the driver will not have to be installed.
40