PC Chips A41G V7.0 User Manual page 39

Motherboard User's Guide
3 Select [2], then select LD 1 in the following page.
The Define LD Menu screen appears (Figure 1.4).
Figure 1.4 Define LD Menu
Using the Define a New Array Screen
If necessary, press the tab key to move from field to field until the appropriate field is
highlighted.
• Selecting the RAID Mode
By default, this is set to Mirroring. To change to a different RAID mode, press
the spacebar until the mode that you want appears in the RAID Mode box—
RAID0/1/10/JBOD.
Note: Not all RAID levels are supported on all platforms.
• Selecting the Stripe Block Size
Stripe block size is given in kilobytes, and affects how data is arranged on the
disk. It is recommended to leave this value at the default Optimal, which is
64KB, but the values can be 64 KB and 128 KB. When choose RAID 1, the
Stripe block size is unchangable.
36