Bottom Rack Loading - Kenmore 665.1280 Use And Care Manual

The removable top rack allows you to wash larger items such
as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from the dishwasher.
To remove the rack:
To gain access to the removable tabs on the tracks/rails, pull
the upper rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front
end of the rack out of the track. Then repeat this step on the
other side to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end
outwith a slightly forward then upward motion.
To
replace
the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align
the rack's back end attachment tabs with the cutout in the
track. Push down into place.
Pull the tracks completely out, and align the rack's front end
attachment tabs with the cutout in the track. Push down into
place. Youwill heara snapwhen the front end of the rack is
secured into place on each side.
Removal
/
/
The bottom rack is best suited for plates, pans, casseroles, and utensils. See recommended loading patterns shown.
Load small items in the bottom rack only if they are secured in place.
Load plates, soup bowls, etc., between tines.
Load bowls securely between the rows of tines. Ensure that there is space between dishes so that the spray will reach all surfaces.
Load heavily soiled items facing the spray.
NOTE: Ensure that detergent dispenser is not blocked by tall items such as cookie sheets or cutting boards placed at the left-hand
front of rack. See "Start Up/Quick Reference" section.
10place settingload 12place settingload
16