Rinse Aid - Kenmore 665.1280 Use And Care Manual

IMPORTANT: Yourdishwasher isdesigned to use a liquid rinse
aid. The use of rinse aids greatly improves drying by allowing
water to drain from the dishes after the final rinse. They also
keep water from forming droplets that can dry as spots or
streaks.
Filling the dispenser
The dispenser holds 5 oz (150 mL) of rinse aid. Under most
conditionsthis will last 1to 3 months.
1. Turnthe knob to the REFILL position and remove.
2. Pour rinse aid into the opening until the indicator points to
FULL. Do notoverfill.
3. Clean up anyspilled rinse aid. Spilled rinse aid can create
excessivesuds.
4. Replace the knob and turn to the LOCK position.
NOTE: Indicator reads correctfill level when dooris completely
opened.
Rinse Aid
Setting
Your rinse aid dispenser is adjustable. For most water conditions,
the factory setting will give good results. If you have hard water
and notice calcium buildup on your dishware, you may want to
try a higher setting. If you notice foam in your dishwasher, use a
lower setting.
Toadjustthesetting
1. Turnthe knob to the REFILL position and remove.
2, Turn the arrow inside the dispenser to the desired setting.
3. Replace the knob and turn to the LOCK position.
12