Maintenance And Care; Cleaning The Raven Mti - Raven MTi User Manual

Maintenance and Care

Cleaning the RAVEN MTi

The RAVEN MTi ships with a Revitalizer spray that used a NanoGlide™ coating, which
protects the screen from oil, water, and dirt. The coating also strengthens the surface
of the glass making it scratch resistant and smooth to the touch.
IMPORTANT:
Do not use regular cleaning solutions on the RAVEN MTi.
Household sprays and cleaners will affect the touch glass coating, which can impact
performance. We recommend a simple microfiber cloth to clean the surface of the
glass.
If more intensive cleaning is required, use a lightly damp cloth. Make sure that the
cloth is not too wet; the coating will make the water bead and drip. As a precaution,
keep a dry cloth at the bottom of the screen to catch any runoff.
Do not allow moisture from liquids to accumulate on the screen when cleaning.
Accumulation of liquids can damage internal electrical devices. If a damp cloth
must be used, make sure to remove any excess water immediately after cleaning.
To clean RAVEN MTi's exterior metal parts use a simple microfiber cloth. If deeper
cleaning is required, a non-abrasive cleaning solution can be used on the metal parts
only. Be sure to not spray cleaner on the RAVEN MTi directly, rather spray the
cleaner on to a cleaning cloth away from the RAVEN MTi, then use the dampened
cloth on the RAVEN MTi's metal parts.
The high gloss lacquer finish on RAVEN MTi's side panels can be damaged by some
cleaners. Use a gentle cleaning solution. Test in an inconspicuous area first.
RAVEN MTI CUBASE/NUENDO USER MANUAL 8