Raven MTi User Manual page 34

To manually align your Mix window, hit the green maximize button on the Mix
window.
Then, Drag the bottom of the Mixer leaving about half of the bottom screen empty
like so. Now, launch the RAVEN Software.
Now, on the "Channel Selector" tab, we'll first grab the bottom of the Mix Window
here and align the Cubase Yellow or White outline, with the RAVEN Red Guideline.
Then, we'll align the top of the track faders window with the provided red guideline
at the top. We'll adjust the fader size by clicking and dragging the area where the
Channel Selector meets the first fader here.
Note: You can hit hide the RAVEN if necessary.
Now, we'll need to remove two tracks from our Channel Selector. First, remove
"Stereo In" from the top of your session, and then remove "Stereo Out" from the end
of your session, like this.
Last, we'll need to make sure we have a maximum of 24 tracks showing. Use the Key
Commands: "G" and "H" on the keyboard to set your mixer to display 24 tracks.
Confirm alignment by ensuring the tracks are seamless between Cubase or Nuendo
and RAVEN.
This alignment is detailed to the pixel, so a minor misalignment will result in an
alignment failure. Be sure to align accurately before proceeding.
*This is an example of proper alignment.
RAVEN MTI CUBASE/NUENDO USER MANUAL 34