Raven MTi User Manual page 45

If you would prefer to move by 24-tracks, simply use two fingers to swipe left
or right on the lower half of the fader plates.
3. Banking Buttons:
Users may choose to bank tracks by 1 or 24 tracks. To switch between the two
modes, simply press and hold the banking buttons and they will switch between
24 and 1.
NOTE:
Users may feel they've reached the end of their project but are missing tracks.
This is not the case, RAVEN will only recognize full sets of 24 Tracks. If there
are remaining tracks after the user has reached the last set of 24 tracks, the
user should then switch to single track banking to reach the last tracks on the
Raven Mixer.
If you ever feel your Internal Mixer fader alignment is not incorrect, simply use
the Banking Buttons in either direction and your alignment should restore,
unless there is a window alignment issue.
4. Commands and Modifiers:
All normal functions such as Save and Undo are found in the toolbar. Modifiers
keys latch when touched once, and unlatch when a command is executed.
5. Close Plugin:
Use this button to close the last plugin.
RAVEN MTI CUBASE/NUENDO USER MANUAL 45