Mti2 Calibration - Raven MTi User Manual

NOTE: TRIPLE RAVEN IS NOT YET SUPPORTED, BUT WILL BE AVAILABLE SOON.

MTi2 CALIBRATION

Calibration is not required for MTi2 users. If you notice you'd like to make an
adjustment to the touch response, navigate to the "Utilities" folder within the
Applications folder and hit "UPDD Calibration."
From a center, seated position – press the center of the provided addition symbol like
you are delivering your fingerprint to the display until the circle prompt confirms. Use
your left hand for the left side of the display and right hand for the right side of the
display. There are four corners to calibrate.
To Calibrate for the RAVEN DUAL setup, perform the same process with the two
RAVEN's attached. Note: Use your left hand for the left display and your right hand
for the right display when calibrating, sitting in the center of the two RAVENs.
NOTE: TRIPLE RAVEN USE ARE NOT YET SUPPORTED.
SYSTEM PREFERENCES CONFIGURATION:
IMPORTANT: Be sure to hide the OS X Dock when using RAVEN.
1. Navigate to "System Preferences" by going to the Apple drop-down menu on
the top left of the Finder and select, System Preferences.
2. Now, select the "Sharing" folder option and confirm your computer is named. If
not, make sure and name your computer as displayed in the image below.
RAVEN MTI CUBASE/NUENDO USER MANUAL 26