Raven MTi User Manual page 111

FX 4 SEND 5 CHAN SET
In the Project window, after creating an FX 4 send, select another track and press FX 4 SEND 5 CHAN SET to load the
FX 4 send to Send 5 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window tab
- Cursors over to Send 5
- Opens the Sends window
- Selects FX4 from the list
Note: The Channel Settings window should be closed before running this command.
FX 5 SEND 6 CHAN SET
In the Project window, after creating an FX 5 send, select another track and press FX 5 SEND 6 CHAN SET to load the
FX 5 send to Send 6 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window tab
- Cursors over to Send 6
- Opens the Sends window
- Selects FX5 from the list
Note: The Channel Settings window should be closed before running this command.
BITCRUSH SEND 5 CHAN SET
In the Project window, with the Channel Settings window closed, press BITCRUSH SEND 5 CHAN SET to load Bitcrusher
to Send 5 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 5
- Selects "add" from the menu
- Selects "Bitcrusher" from the Effect dropdown menu on the new FX track window
STEREO DELAY SEND 3 CHAN SET
In the Project window, with the Channel Settings window closed, press STEREO DELAY SEND 5 CHAN SET to load Stereo
Delay to Send 5 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 5
- Selects "add" from the menu
- Selects "Stereo Delay" from the Effect dropdown menu on the new FX track window
RAVEN CUBASE/NUENDO BASIC LAYOUT USER MANUAL | 34