Epg Views; Current" View - Kathrein UFS 946/CI+ Operating Instructions Manual

Electronic Programme Guide (EPG)

EPG views

"Current" view


Press the (green) button to call up the
"Current" view in EPG. In the "Current"
view you can see all channels displayed
in the order of the complete channel
list. Provided that EPG data has been
supplied by the channel provider, the
receiver shows the current programme
running on each channel, with start time,
fi nish time, duration and progression bar.
 
Use the cursor ( ) buttons or the number pad to select the desired channel. Use the button to
view further information, if available, on the selected programme.
If you want to view the programme currently being shown on a channel, you need not exit the EPG,

just select the desired channel and press the button. At the top right of the screen you will see the

current TV picture for the selected channel. The picture however only appears once the button has
been pressed. Prior to this the picture from the old channel that had previously been selected is visible,
even though the EPG is no longer set to that channel.

The button allows you to look ahead to future programmes on the channels in 15-minute steps

(press the button to return to the current time).

By pressing the (green) button in
the "Current" view, you can display
a schedule in 15-minute steps (see
screenshot on the right). The desired time

is selected using the cursor buttons ( )

and confi rmed using the button.
30