Assembly; Propane Fuel Connection - Dickinson SPITFIRE 180 Operating And Installation Instruction Manual

8

Assembly

You will need to attach the feet of the BBQ to the rest of the unit. The two
feet of the Sea-B-Que slide on to the inserted studs on the base. The flanges
are to point outwards. Use the four 10 x 32 nuts and #10 lock-washers to
secure the legs to the base. The drip tray is placed in the area between both
legs. The 4 porcelain grill sections will sit on the ledges provided above the
burner. Remember to remove all protective plastic from the body.

Propane Fuel Connection

The most common LPG connection is the 1 lb. disposable bottle that
connects directly to the barbeque or a hose straight from the barbeque to a
10lb. or 20 lb. tank. We have 6ft hose part# 15-188 and 8ft hose part# 15-
189 high pressure propane hoses available. High pressure propane is
required with the regulator control included with the Sea-B-Que. The Sea-
B-Que gas control is also the pressure regulator part# 15-110.
If your boat has a regulated propane source, the fuel line to the Sea-B-Que
must be tee'd off before any regulators on the main fuel supply. A high
pressure T type connector is available from Dickinson for this. *See the high
pressure T connection diagram below.
www.dickinsonmarine.com ~ info@dickinsonmarine.com
Form#7.2-257 Issue#2