Lp Gas Cylinder Specs - Dickinson SPITFIRE 180 Operating And Installation Instruction Manual

6
LP GAS CYLINDER SPECS AND INSTALLATION
FOR OUTDOORS USE ONLY. DO NOT operate indoors or in an
enclosed area such as a garage shed or breezeway.
Use your grill outdoors in a well ventilated space away from
dwellings or other buildings to prevent dangers associated with gas
accumulation and toxic vapors. Not adhering to these clearances will
prevent proper ventilation and may increase the risk of a fire and/or
property damage, which could result in personal injury
Maintain a minimum clearance of 36 inches (91cm) between all sides
of the BBQ, patio railings, walls or other combustible material.
DO NOT use grill under overhead unprotected combustible
construction.
DO NOT install this BBQ in a recreational vehicle
The BBQ and its individual shutoff valve must me disconnected from
the gas supply piping system during any pressure testing of that
system at test pressures in excess of ½ PSI (3.5kPa)
The BBQ must be isolated from the gas supply piping system by
closing its individual manual shut-off valve during any pressure
testing of the gas supply piping system in equal or less than ½ PSI
(3.5 kPa)
The LP gas supply cylinder to be used MUST be constructed and
marked in accordance with the specifications for LP gas cylinders,
U.S. Department of Transportation (DOT) or the standard for
cylinders, spheres and tubes for the Transportation of Dangerous
Goods, CAN/CSA-B339
The propane supply cylinder system must be installed with proper
vapor withdrawal capabilities
The BBQ pressure regulator supplied with this unit must be used in
the operation.
Any replacement regulators must be of those specified by the
appliance manufacturer
www.dickinsonmarine.com ~ info@dickinsonmarine.com
Form#7.2-257 Issue#2