Leak Test - Dickinson SPITFIRE 180 Operating And Installation Instruction Manual

1. Do not use or permit sources of ignition in the area while doing the
leak test. This includes smoking.
2. Leak testing solution should be half liquid soap and half water.
3. Apply the solution to the LP gas delivery system at all connections.
4. Bubbles in the soap solution indicate that a leak is present.
5. The leak(s) must be stopped by tightening the loose joints, or
replacing the faulty parts.
6. Do all leak testing in an outdoor area
7. NEVER use a flame to check for leaks
***DO NOT USE BARBEQUE UNTIL LEAK IS CORRECTED***
Pre-start Checklist
When using your grill for the first time, ensure that;
- The BBQ is properly assembled
- All gas connections have been properly tightened and leak tested
- The grill is in a stable position on its legs or mount
- The drip tray is in place
- There are no obstructions to the ventilations
- You have read all warnings in this manual
www.dickinsonmarine.com
GAS LEAK TESTING
~ info@dickinsonmarine.com
Form#7.2-257 Issue#2
10