Synchronised Recording - Sony SLV-EZ70AS/NZ Operating Instructions Manual

Synchronised recording (continued)
3
4
The unit automatically turns on and starts recording when it receives video/
audio signals from the connected equipment.
To cancel the Synchronised recording
Press SYNCHRO REC so that the button's light turns off.
To stop recording
Press p STOP while recording.
The unit automatically stops recording when the tape reaches the end or
when the other equipment stops transmitting the video/audio signals.
Notes
• Some equipment automatically turn off in a certain time if you do not operate it
after it turns on with the timer. In this case the Synchronised Recording also stops
automatically.
• The Synchronised Recording starts and stops according to the signals from the
connected equipment. Refer also to the instruction manual of the connected
equipment for its timer function.
• If the settings for Timer Recording and Synchronised Recording overlap, the
programme that starts first has priority and the second programme starts recording
only after the first programme has finished.
• To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode,
display "LP" in the tape speed position.
50
Additional Operations
Press SP/LP (SP/EP) to select the tape speed, (SP or LP for the PAL
colour system, and SP or EP for the NTSC colour system.)
Hold SYNCHRO REC down for more than two seconds.
The SYNCHRO REC button lights up and the unit stands by for
recording.