Table of Contents
Advertisement
Notes
• The TV/VIDEO button selects an input source of the TV from either aerial in or line
in. The button does not control this VCR.
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer's code
number.
1
Set TV / VIDEO at the top of the remote commander to TV .
2
Hold down ON/STANDBY, and enter your TV's code number(s) using
the programme number buttons. Then release ON/STANDBY.
Now you can use the ON/STANDBY, VOL +/–, PROG +/–, programme
number buttons, ? (ten's digit) and TV/VIDEO buttons to control your
TV. You can also use the buttons marked with a dot (•) to control a Sony TV.
To control the VCR, reset TV / VIDEO to VIDEO .
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Manufacturer
Code number
1
Sony
01*
Akai
68
Blaupunkt
10
Ferguson
52
1
Grundig
11*
Hitachi
24
ITT/Nokia
15,16,69*
1
Mitsubishi
27*
NEC
66
Panasonic
17*
1
,02
3
1
1
1
,28*
,50*
,51*
,49
Manufacturer
Code number
1
Philips
06*
Saba
12,13
Samsung
22,23
Sanyo
25
Sharp
29
TEAC
67
Telefunken
36
2
Thomson
43*
Toshiba
38
1
1
,07*
,08*
continued
7
Getting Started
Hide quick links:
Advertisement
Table of Contents
