Presetting Channels - Sony SLV-EZ70AS/NZ Operating Instructions Manual

Presetting channels

If you can receive no channels or only a few channels after performing the
EASY G-CODE SET UP (page 15), preset all receivable channels
automatically using the one touch tuning or the TUNER PRESET menu.
If some channels could not be preset automatically when using the EASY
G-CODE SET UP, one touch tuning or TUNER PRESET menu, preset them
manually; if there are any unwanted channels among the preset ones, you
can disable the channels.
Presetting all receivable
channels using one touch
tuning
1
Press ONE TOUCH TUNING on the VCR for more than 3 seconds.
ONE TOUCH
TUNING
The VCR starts the channel presetting.
The WAIT indicator goes off when all the receivable channels are
preset.
To check if the channels are preset correctly
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the
TV screen changes to a different programme each time you press
PROGRAM +/–, the channels are preset correctly.
Tip
• To stop one touch tuning, press ONE TOUCH TUNING or p STOP on the VCR
during the setting.
ONE TOUCH
TUNING
SP
Getting Started
APC
continued
17