Sony SLV-EZ70AS/NZ Operating Instructions Manual page 45

To record from a source connected to the LINE-1 IN or LINE-2 IN
(or LINE-3 IN: SLV-EZ70AS only) jacks, press INPUT SELECT or
PROG +/– to display "L1" or "L2" (or "L3": SLV-EZ70AS only) in
the "PROG" position.
3
Press / to confirm the setting.
The cursor (") appears at the beginning of the line. To enter another
PLAY
OK setting, move the cursor to the next line and repeat step 2.
4
Press OK.
PLAY
OK
5
• ON/
Press ON/STANDBY to turn off the VCR.
STANDBY
The
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
., the indication changes as shown below. Press > to change the indication
in reverse order.
the current date n SU-SA (Sunday to Saturday) n MO-SA (Monday to
Saturday) n MO-FR (Monday to Friday) n EVERY SA..... n EVERY MO n
EVERY SU n 1 month later n(dates count down) n the current date
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use SP/LP (SP/EP).
• To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode,
display "LP" in the tape speed position.
Note
• The t indicator flashes in the display window when you press ON/STANDBY
with no tape inserted.
indicator appears in the display window and the VCR
t
45
Basic Operations