Step 4: Tuning Your Tv To The Vcr - Sony SLV-EZ70AS/NZ Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
1
ON/STANDBY
Press 1/u ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF CHANNEL
3
Turn on your TV and select a programme position for the VCR
picture.
This channel will now be referred to as the video channel.
Some TV has the programme position, such as 0, that is reserved for
a VCR. In this case, select that programme position for the VCR
picture. Refer to the instruction manual of your TV for details.
1/u ON/STANDBY
RF CHANNEL
PROGRAM +/–
SP
APC
continued
11
Getting Started