Presetting The Active Channels; Presetting Desired Channels - Sony SLV-X37 Operating Instructions Manual

i Presetting the Active Channels
This VCR is capable of receiving VHF channels 2 to 13, UHF
channels 14 to 69, and CATV channels A-6 to A-1, A to W,
W+30 to W+84. These channels can be preset using the
Remote Commander and the TUNER PRESET display. To
watch and record TV programs, you must preset the channels
on the VCR using the CHANNEL +/~ buttons.
Presetting Desired Channels
1 Tum on the TV.
If your TV is connected to both VHF/UHF OUT and LINE
OUT of the VCR:
Select the input from the VCR.
If your TV is connected only to the VHF/UHF OUT of the
VCR:
Select the channel for the VCR (channel 3 or 4).
2 Press POWER to turn on the VCR.
3 Press TV/VTR to light the VTR indicator.
(Only used for TVs without video/audio input jacks)
4 Press INPUT SELECT so that the channel number
appears in the display window.
Channel number
VTR indicator
10 Getting Started
5 Press MENU.
The main MENU appears on the TV screen.
MENU
» TIMER SET/CHECK
6 Press a or v to move the cursor (») to TUNER PRESET.
MENU
TIMER SET/CHECK
®» TUNER PRESET
CLOCK SET
LANGUAGE SET
Cursor
7 Press EXECUTE.
The TUNER PRESET display appears.
TUNER PRESET
® CHANNEL NO.
ADDIERASE
2
ADO *ERASE
AFT eON OFF
TUNING
vu
8 Press <or> to select the desired channel position
number.
TUNER PRESET
» CHANNEL.NO.
ADDERASE:
Channel number selected
AFT
TUNING
" 2
9 Press « or ¥ to move the cursor to TUNING.
TUNER PRESET
CHANNEL NO,
#
ADDERASE ADD ERASE
AFT ON OFF