Sony STR-DA5400ES Service Manual page 14

STR-DA5400ES
QQ
3 7 63 1515 0
Name Function
RETURN/ Press to return to the previous
EXIT menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
CATEGORY Press to select the category for
+/–
satellite tuner.
(U.S.A./
Canadian
model only)
·/· Press to select an album.
DISC SKIP Press to skip a disc when using
a multi-disc changer.
MASTER Press to adjust the volume level
VOL +/– of all speakers at the same time.
TV VOL +/– Press TV (
VOL +/– to adjust the volume
level of the TV.
MUTING Press to turn off the sound
temporarily. Press the button
again to restore the sound.
BD/DVD/ Press to display the menus of
TOP MENU, the DVD player on the TV
MENU
screen. Then use / / / and
to perform a menu
operations.
MACRO1, Press AMP (
MACRO2 MACRO 1 or MACRO 2 to set
up the macro function.
a)
See the table for information on the buttons that
you can use to control each component.
b)
The tactile dot is attached to these buttons (TV/5,
, PRESET +/TV CH +). Use as a mark of
operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
TE
example only. Therefore, depending on the L 13942296513
component, the above operation may not be
possible or may operate differently than described.
www
.
14
http://www.xiaoyu163.com
Zone 2/Zone 3 remote
commander (RM-AAP027)
This remote is for zone 2/zone 3 operations.
), then press TV
), then press
Name
AV / (on/
standby)
/ (on/
standby)
ZONE
Input
buttons
ENTER
PICTURE
FAVORITES Press once to display the stored
x ao
y
i
http://www.xiaoyu163.com
8
Name
Q Q
Function
3 6 7 1 3
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
Press / ( ) at the same time,
to turn off the receivers in the
main zone, zone 2 and zone 3,
and any other Sony components
(SYSTEM STANDBY).
Note
The function of the AV /
switch changes automatically
each time you press the input
button ( ).
Press to turn the receiver on or
off in zone 2 or zone 3.
Press AV / ( ) at the same
time to turn off the receivers in
the main zone, zone 2 and
zone 3, and any other Sony
components (SYSTEM
STANDBY).
Press to enable the zone 2 or
zone 3 operation.
Press one of the buttons to
select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
( ). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components. You can program
the remote to control non-Sony
components following the
steps in "Programming the
remote"
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
Press repeatedly to cycle
through the available picture
modes of TV.
u163
favorite channel list of TV.
.
a)
See the table for information on the buttons that
you can use to control each component.
b)
The tactile dot is attached to these buttons (SAT/5,
operation.
2 9 9 4 2 8
Function
F1/F2 Press BD or DVD ( ), then
press F1 or F2 to select a
component to operate.
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
Note
The F1/F2 function does not
work for video components that
have no recording function.
GUIDE Press to display a guide list of
the DVD player or satellite
tuner on the TV screen.
Press / / / to select the
menu items for zone 2/zone 3.
Then press to enter the
selection.
OPTIONS Press to display and select items
TOOLS from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
MENU Press to display the menu used
HOME to operate audio/video
components or a TV.
a)
/ Press to operate the DVD
a)
player, Blu-ray Disc Player, CD
a)
player, MD deck, tape deck, or
a) b)
component connected to the
a)
/
DIGITAL MEDIA PORT
adapter etc.
PRESET Press to register FM/AM/
b)
+ /– satellite tuner stations or to
select preset stations.
b)
TV CH + /– Press TV (
), then press TV
CH + /– to operate the TV,
satellite tuner, VCR, etc.
RM SET UP Press to set up the remote.
TV / Press to turn the TV on or off.
1 5 0 5 8 2 9 9 4
TV Press to enable the TV
operation.
SHIFT Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
WIDE Press repeatedly to select the
wide picture mode.
TV INPUT
Press TV ( ), then press TV
INPUT to select the input signal
of a TV.
BD/DVD Press to display the menus of
TOP MENU, the DVD player on the TV
MENU screen. Then use / / / and
to perform a menu
operations.
DISPLAY Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI mode, press the
button to display the menu on
the TV screen.
RETURN/ Press to return to the previous
EXIT menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
·/· Press to select an album.
DISC SKIP Press to skip a disc when using
a multi-disc changer.
MASTER Press to adjust the volume level
VOL +/–
of all speakers in zone 2/zone 3
at the same time.
TV VOL +/–
Press TV ( ), then press TV
m
VOL +/– to adjust the volume
level of the TV in zone 2/
zone 3.
co
MUTING Press to turn off the sound
temporarily. Press the button
again to restore the sound.
, PRESET +/TV CH +). Use as a mark of
9 9
2 8 9 9