13.4. Matrix Control from Room Enable
When Set to Yes (default), IR coming from a Room can be used to control the matrix. When set to No, matrix
commands sent from a room will not control the matrix. This setting may be needed if IR flooding from sunlight or
other source is sometimes present in one or more rooms.
13.5. Front Panel Power Button Active
Use this feature to Disable/Enable the front panel power button of the matrix when using an Automation System.
This will prevent the matrix from being powered OFF which may disrupt matrix control from an automation
system.
14. INPUT/OUTPUT OPERATION
The operating status is displayed and control of inputs and outputs is performed with the grid on the left side of the
screen. It is provided so that the functionality of the system can be tested and controlled.
Here you can perform the following:
•
View which inputs have sources connected and turned on
•
View which outputs are un-muted
•
View which input is assigned to an output
•
Assign inputs to outputs
14.1. Connection Status
Note that a green box does not indicate if a display is connected or OFF. Should no image be visible on the display,
verify that it is connected and ON.
FIGURE 7
13