Table of Contents
Advertisement
6.
CONTROL OF THE SWITCH
The B-260-SWTCH-4x1 can be controlled through the SWITCH button on the front panel
(other options for control are mentioned in section 5.2.3 and detailed out in section 5.3/5.4).
6.1. Front Panel Button Control
6.2. IR Remote Control**
B-260-SWTCH-4x1 Switch can be controlled via IR using the provided IR Remote or an IR
Control system. In order to use the included IR Remote an IR receiver will need to be purchased
separately. Visit https://www.snapav.com/shop/en/snapav/search/infrared for available IR
Receivers.
Additionally, 3rd party IR control system can also be used and will need to be purchased from a
3rd party vendor.
Buttons
1
2
3
4
5
Note: Since the encoding format for IR codes above is NEC (38KHz), please ensure any third-
party device used to IR control the switch supports NEC (38KHz).
Switch to previous
source input
Switch to a specific
source input (1-4)
IR Codes
Description
0x02 0x0a Switch to next active source input (Cycle 1-4).
0x02 0x08 Switch to previous active source input (Cycle 1-4).
0x02 0x04 Switch to source input 1.
0x02 0x05 Switch to source input 2.
0x02 0x06 Switch to source input 3.
0x02 0x0c Switch to source input 4.
N/A
Not available.
Press the switch button to
cycle through multiple sources
Switch to next
source input
This button is
not available
11
Advertisement
Table of Contents
