Replacing Or Installing Scrub Brushes (Cylindrical) - Windsor chariot iscrub 20 CS20 Operating Instructions Manual

Replacing or Installing Scrub Brushes
(Cylindrical)
FOR SAFETY: Before leaving or servicing the machine;
stop on level surface, turn OFF machine and remove
key.
1. Turn machine power off.
2. From right side of machine, lift squeegee latch and
swing side squeegee outward to access brushes.
Squeegee Latch
3. Press brush release. Brushes will drop downward.
Remove old brushes.
4. Slide new brushes into receptacle at far side of
deck, lift upward and snap into position. Ensure
brushes are secure.
5. Close side squeegee and latch securely.
86333220 CS20
Maintenance
39