FujiFilm Xerox Phaser 6270 User Manual page 169

A
Wired Network Ethernet
Protocol
IP Filter
IEEE 802.1x
Initialize NVM
Adobe Protocol
B
USB Settings Port Status
Adobe Protocol
TCP/IP
These items do not appear on the model available in China.
Auto * , 10BASE-T Half, 10BASE-T Full,
100BASE-TX Half, 100BASE-TX Full
IP Mode
IPv4
IPsec
These items do not appear on the model available in China.
LPD, Port 9100, IPP, SMB (TCP/IP), SMB (NetBEUI),
FTP, WSD, E-mail Printing, StatusMessenger,
InternetServices, Bonjour (mDNS), Telnet
HTTP - SSL/TLS
This item appears only when a certificate is registered in the printer.
These items do not appear on the model available in China.
NetWare
SNMP
No.n / Address
No.n / Mask
No.n / Mode
n: 1-5
Disable
Ready to Init
Auto * , Standard,
BCP, TBCP, Binary
Enable * ,
Disable
TBCP * , Binary, Auto, Standard, BCP
Dual Stack * , IPv4, IPv6
Get IP Address
IP Address, Subnet Mask,
Gateway Address
Disable
Enable * ,
Disable
NetWare IP
SNMP (UDP/IP)
000.000.000.000 *
Off * , Accept,
Reject
DHCP / Autonet * ,
BOOTP, RARP,
DHCP, Panel
000.000.000.000 *
Enable * ,
Disable
Enable * ,
Disable
Enable * ,
Disable