NA_EN Before Use Part Names Before using the printer, check to make sure you have the When you use the printer for the first time, be sure to fully following. charge the battery. Supplied Accessories Front • USB cable for charging (1) •...
Be careful to properly attach the USB cable as indicated. smartphone before using the printer. • If you are using an Android OS smartphone, please search for the INSTAX Mini Link Smartphone App in Google Play Store and install it. To an indoor power *Requirements for Android OS smartphones: Android Ver.
INSTAX SQUARE Film or INSTAX WIDE Film cannot be used. Notes on the film pack • Each FUJIFILM INSTAX Mini Film pack contains one black film protective cover and 10 film sheets. • Do not remove the film pack from its inner bag before loading it into the printer.
Close the film door� Turning on/off the Printer Remove the black film cover that is automatically Press and hold the Power button for approximately 1 second to rejected� turn the printer on or off. Turning the printer on lights up the LED. If no operation occurs for roughly 10 minutes, the printer turns off automatically.
Press and hold the Power button for approximately 1 second to turn the printer on� The LED lights up. Start the downloaded INSTAX Mini Link App� Read the terms of use, then put a checkmark in the [Agree to this content] box, and tap [Agree to this content →]�...
Page 8
When a printer is connected, tap [Close]� or swipe the image up on the screen� Before tapping , tapping on the lower right adjusts the image and tapping on the lower left applies a filter to the image. again� The printer starts printing. When the film has been ejected (the printer stops making a sound), hold the edge of the film, then Note...
1 second to turn the printer on� The LED lights up. Start the downloaded INSTAX Mini Link App� When the film has been ejected (the printer stops making a sound), hold the edge of the film, then take it out�...
App. Note Make sure that [Camera operation settings] is set to [ON] on the INSTAX Mini Link App. When it is set to [OFF], this function is unavailable. Changing the App Mode When the Top Screen Is Selected on the App Stand the printer up to switch to Print mode.
INSTAX Camera on the App Recording method 3-color exposure with OLED Tilt the printer forward to zoom in. Film used FUJIFILM INSTAX Mini Instant Film (sold separately) Number of films 10 films/pack Image size 62 mm × 46 mm/2.4 in. × 1.8 in.
If the problem persists even after taking action, please contact the FUJIFILM service center for repair in your I cannot change Setting [Camera operation settings] on the country or visit the website below.
Never attempt to take this product apart� You may be injured� environments with temperatures above 40 °C (104 °F); at All repairs should be handled solely by Fujifilm� Injury may temperatures below 5 °C (41 °F), the battery will not charge.
■ Use only as part of a Bluetooth network� against harmful interference in a residential installation. This FUJIFILM Corporation and its affiliates do not accept liability for equipment generates, uses, and can radiate radio frequency damages resulting from unauthorized use. Do not use in...
Page 15
Instead it should be taken to an applicable collection point for the help. recycling of electrical and electronic equipment. Changes or modifications not expressly approved by the Fujifilm By ensuring this product is disposed of correctly, you will help representatives responsible for compliance could void the user’s prevent potential negative consequences to the environment and authority to operate the equipment.
Need help?
Do you have a question about the instax mini Link and is the answer not in the manual?
Questions and answers