Connecting A Dvd Player With Colorstream® (Component Video), A Vcr, And A Satellite Receiver - Toshiba 22AV500U Owner's Manual

Chapter 2: Connecting your TV
Connecting a DVD player with ColorStream® (component video), a VCR,
and a satellite receiver
Your TV has one set of ColorStream® (component video) inputs.
From satellite dish
Satellite receiver with component video
You will need:
• coaxial cables
• standard NV cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. 00 not connect both types of
video cable to VIDEO IN at the same time or the picture
performance will be unacceptable.
- If you have
a
mono VCR, connect UMONO on the TV
to your VCR's audio out terminal using the white audio
cable only
• standard audio cables
• component video cables
- You can connect the component video cables (plus
audio cables) from the OVO player or satellite receiver to
ColorStream HD terminals on the TV The ColorStream
HD terminals can be used with Progressive (4BDp, 72Dp)
and Interlaced (4BDi, 1OBDi) scan systems. A 1DBDi
signal will provide the best picture performance (1OBDp
is not supported).
- If your OVO player or satellite receiver does not have
component video, connect
a
standard A/V cable to
VIDEO IN. If your OVO player has HoMI video, see page
17.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD video
input source on the TV *
To view satellite programs using the component
video connections:
Turn on the satellite receiver. Select the ColorStream HD video
input source on the TV *
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO video input source on the TV. *
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD video input source on the TV* to
view the DVD.
*
To select the video input source, press INPUT on the remote control
(I&' page 21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.