Connecting A Personal Computer (Pc) - Toshiba 40RV52R Owner's Manual

Chapter 2: Connecting your TV·
Connecting a personal computer
(PC)
With either the PC IN or HOMI connection, you can watch
your computer's display on the TV and hear the sound from
the TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV,
use an analog RGB (IS-pin) computer cable and a PC audio
cable.
PC audio
cable
PC audio
output
Conversion adapter
(if
necessary)
• To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. The PC IN terminal can
accept and display VGA, SVGA, XGA, WXGA and SXGA
signal formats. For detailed signal specifications
(~?
page
56).
Other formats or non-standard signals will not be displayed
correctly.
• To display the optimum picture, use the PC setting feature
(1&
"Using the PC settings feature" on page 47).
Note:
• The PC audio input terminals on the TV are shared with the
HoMI-1 analog audio input terminals (Il$" page 48)
• Some PC models cannot be connected to this TV
• An adapter is not needed for computers with
a
compatible
mini o-sub 15-pin terminal.
18
I Depending on the OVO'S title and the specifications of the
PC on which you are playing the oVo-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• Signal names for mini O-sub I5-pin connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
name name name
J
R 6 Ground II Reserved
2 G 7 Ground 12 SOA
3 B
8
Ground 13 H-sync
4 Reserved 9 5V 14 V-sync
5
Reserved 10
Ground
15
SCL
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HOMI terminal on the TV, use
an HOMI-to OVI adapter cable and analog audio cables.
If connecting a PC with an HOMI terminal, use an HOMI
cable (type A connector). Separate analog cables are not
necessary
(1&
page 15).
TV back panel
, - - - HOMllN - - - - - - - - ,
Homl
2
PC audio
cable
PC audio
output
The HOMI input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), nop (60Hz),
1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For
detailed signal specifications, see page 56.
Note:
• The edges of the images may be hidden.
• If receiving a 480i (HoMI), 480p (HoMI), 720p, 1080i, or
1080p signal program, Native mode scales the video to
display the entire picture within the borders of the screen