Table of Contents
Advertisement
SmartRG™ Residential Gateways
Manag ing Your SmartRG ™ Gateway
Save, Restore or Default Configurations
To save the existing gateway configuration to your hard drive:
1. Select Management -> Settings -> Backup.
2. Click Backup Settings.
To restore a previously saved gateway configuration:
1. Select Management -> Settings -> Update.
2. Browse to find the saved config file on your hard drive (e.g. mySmartRGConfig.conf)
3. Click Update Settings.
To reset the gateway to factory default settings:
1. Select Management -> Settings -> Restore Defaults.
2. Click Restore Default Settings.
Update Software
To update the gateway's software:
1. Select Management -> Update Software.
2. Browse to find the new gateway software on your hard drive (ex:
CA_D2.3.0.2010_04_12_09_07_16_SR300N_fs_kernel)
3. Click Update Software.
NOTE
The software update process takes approximately 2 minutes to complete. Do NOT power
cycle the gateway until the software update process has completed.
P a g e
| 52
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2
Hide quick links:
Advertisement
Table of Contents
