Table of Contents
Advertisement
QUICK GATEWAY CONFIGURATION
Warning:
Do not press the
Reset
button unless you want to clear the current settings. The
Reset
button is in a
small circular hole on the rear panel. If you want to restore the default settings, insert a thin wire (such as a paper
clip) into the hole, press the
Reset
button gently for 1 second, and then release the button. The system reboots
and returns to the factory defaults.
Logging in to your gateway
To change the settings on your gateway, you must log in the gateway's interface. Make sure that you have
completed the steps in "INSTALLATION" before you begin.
1. Open your internet browser application and type 192.168.1.1 into the address line. The authentication
dialog appears.
5
Advertisement
Table of Contents
