Configuring The Layer 2 Interface (Vdsl/Ptm With Vlan Tags) - SmartRG SR10 User Manual

6. Click Apply/Save.
NOTE Enabling QoS for routed IPTV service configurations will improve channel change
performance.
NOTE 802.1P (priority) and 802.1Q (VLAN tag) values will be set at the time of WAN Service
creation as detailed in, "Creating the WAN Service."

Configuring the Layer 2 Interface (VDSL/PTM with VLAN Tags)

In some applications it may be necessary to segment the PTM WAN interface into separate VLANs.
A common application for a VLAN segmented WAN interface is bridged IPTV as detailed in the
"Bridged IPTV Configuration" section. To configure the layer 2 PTM interface to support VLAN
tagged traffic select "VLAN MUX Mode" for "Connection Mode" in step 4 of the "Configuring the
Layer 2 Interface (VDSL/PTM)" section.
S m a r t R G © 2 0 1 2
Configuring Your SmartRG™ - Common Use Cases
C o n f i d e n t i a l P a g e | 21