SmartRG™ Residential Gateways
To configure the SmartRG's QoS feature:
1. Ensure the layer 2 WAN interface "Enable Quality of Service" check box is checked as
detailed in the Layer 2 Interface configuration sections.
2. Select Advanced Setup -> Quality of Service -> QoS Config
Figure 37 Enable the SmartRG's QoS Processing
3. Check "Enable QoS", set the "Default DSCP Mark" to "No Change(-1)" and click Apply/Save.
4. Create the VoIP queue by selecting Advanced Setup -> Quality of Service -> QoS Queue
Config and click Add.
Figure 38 QoS: VoIP Queue Configuration
P a g e
| 46
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2