Step 3 - Connecting An Output; Single Wire Pcm - DCS Paganini Upsampler User Manual

dCS Paganini Upsampler User Manual
STEP 3 – Connecting an Output
Choose which output interface you want to use and connect it up as described below. You can
connect as many outputs as you wish.
If the output format is not compatible with a particular interface, that interface will not be
!
active (for example, the
The Upsampler will not output sample rates that are lower than the input sample rate.

Single wire PCM

Connect one or more of the PCM outputs (AES1, AES2, RCA1, RCA2) to matching inputs on your
DAC. Use the
OUTPUT
96kS/s. Use the DAC's
Paganini Upsampler
~ 50/60 Hz, 30W
Fuse T 500mA L
Paganini DAC
~ 50/60 Hz, 30W
Fuse T 500mA L
Go to STEP 4.
Filename: Paganini Upsampler Manual v1_1x.docx
output cannot carry DSD).
AES1
button on the front panel to set the output sample rate to 32, 44.1, 48, 88.2 or
button to select that input.
INPUT
dCS Model: Paganini Upsampler
DIGITAL (PCM) OUTPUTS
AES1
dCS Model: Paganini DAC
ANALOGUE OUTPUTS
LEFT
Figure 1 – Connecting the single-wire outputs
RCA1
W/CLK
IN
W/CLK
AES2 OUT
RCA2
RCA 1
LEFT
W/CLK
IN
RCA 2
W/CLK
RIGHT OUT
RIGHT
Page 9
Software Issue 1.1x
March 2011
DIGITAL (PCM) INPUTS 1394
AES 1 USB
RCA 1
PUSH
RCA 2
DIGITAL INPUTS 1394
AES 1 AES 2
PUSH PUSH
English version
SUC
SUC