Table of Contents
Advertisement
dCS Paganini Upsampler User Manual
R
P
EAR
ANEL
Digital Inputs
All the digital inputs will accept up to 24-bit PCM data at 32, 44.1, 48, 88.2 or 96kS/s.
The standard PCM inputs are
on RCA phono connectors (V).
RCA2
The
interface on a 'B' type connector (X) will accept uncompressed music data from a
USB
Windows™ PC, MAC™ or sound server equipped with a USB 2.0 interface.
We have tested this interface with several common formats running on Windows™ Vista,
!
Windows™ XP and MAC™ OSX but we cannot accept responsibility for correct
operation with all source devices, operating systems or software.
Digital Outputs
All of the outputs consistent with the selected output mode are active at the same time.
All the single-wire PCM digital outputs generate 24-bit PCM data at 32, 44.1, 48, 88.2 or 96kS/s.
The Paganini Upsampler does not have facilities to reduce the output word length of PCM
!
data to less than 24 bits. It will not give good results with older DACs or other equipment
that cannot process 24-bit data. ALL dCS equipment will accept 24-bit PCM data.
The
and
AES1
AES2
88.2, 96, 176.4 or 192kS/s. These outputs are disabled in DSD mode.
For Dual AES operation at 88.2 or 96kS/s, the
!
otherwise both outputs will carry single AES data.
2 SPDIF outputs are provided,
SPDIF data for output rates up to 96kS/s, even if Dual AES mode is set. They are disabled if the
output is set to 176.4 or 192kS/s or DSD.
Filename: Paganini Upsampler Manual v1_1x.docx
Figure 7 - Rear Panel
on a 3-way female XLR connector (W), SPDIF inputs
AES
outputs (R) can be used individually at up to 96kS/s or as a Dual AES pair at
and RCA2, on RCA phono connectors (S). These outputs carry
RCA1
Dual AES
Page 17
Software Issue 1.1x
March 2011
RCA1
menu page must be set to On,
English version
&
Advertisement
Table of Contents
