1394 Interface - DCS Scarlatti Upsampler User Manual

dCS Scarlatti Upsampler User Manual

1394 interface

Connect the Upsampler's 1394 output to the 1394 interface on a dCS DAC. Use the
on the front panel to set the output format to DSD. If the DAC and the Upsampler are not locked to a
master clock, also connect the Upsampler's
DAC's button to select the
INPUT
Input. The DAC will lock and display SUP.
The Upsampler's 1394 interface is unlikely to work with other manufacturer's 1394
!
interfaces due to proprietary encryption.
!
You can connect 1394 cables in a "tree", but do not connect them in a loop as this
prevents the system initialising.
From source equipment
AES
DIGITAL INPUTS
ANALOGUE OUTPUTS
LEFT RIGHT
L R
Balanced - or - Unbalanced
Analogue Outputs
To pre- or power amplifier inputs
Go to STEP 4.
Start the source playing and set the DAC's Volume control to a comfortable level.
You should have audio at this point.
Filename: Scarlatti Upsampler Manual v1_1x.docx
W/Clock
input. If necessary, set the DAC to sync to its Word Clock
1394
SDIF
RCA1 TOSLINK CH1 CH2
AES 1
BNC
IN OUT
RCA2
W/CLOCK
DIGITAL OUTPUTS
Word
Clock
LEFT
DIGITAL INPUTS
AES 1 AES 2
RIGHT
L R
Figure 3 – Connecting the 1394 interface
Page 11
Output to the DAC's Word Clock Input. Use the
From USB source
RCA1
AES 2
RCA2
1394
1394
RCA 1
DSD/SDIF
CH 1 CH 2
TOSLINK
SPDIF
BNC
OUT
IN
RCA 2
WCLK
Software Issue 1.1x
August 2011
OUTPUT
Scarlatti Upsampler
~
50/60 Hz, 30W
USB
FUSE
SUC
T 500mA L
Scarlatti DAC
~
1394 50/60 Hz, 50W
FUSE
SUC
T 500mA L
English version
button