Using The Menu - DCS Scarlatti Upsampler User Manual

dCS Scarlatti Upsampler User Manual

Using the Menu

The menu gives the user access to a range of additional features. It also allows new features and
performance enhancements to be added at a later date by software upgrades.
The menu is controlled by four buttons.
Alternatively, use the remote control to access the menu.
Use the Menu Guide sheet to help you find the right menu.
Each unit in the range has either three or four top-level menu pages:
The
INFORMATION
unit set-up details.
Each model has a different
are not directly accessible from the front panel.
The
DISPLAY SETTINGS
The
SIGNAL GENERATOR
set-up routines.
→
Use the button to move the highlight to the menu you want, then press the
The next menu level down is displayed. Use the
want, then press the
MENU
Select the exit icon
Filename: Scarlatti Upsampler Manual v1_1x.docx
Press the button to open the menu or select a setting.
MENU
→
Press the button to page forward through the menu.
←
Press the button pages backward through the menu.
Press the button to close the menu or just wait 5 seconds.
POWER
menu displays software issues, serial number, contact details and
SETTINGS
menu is used to adjust and test the display.
menu (on the Transport and DAC only) contains test and
button to display the information or change the setting.
to go back to the previous menu level.
menu, which allows you to set some features that
→
button to move the highlight to the menu page you
Page 20
Software Issue 1.1x
August 2011
button to select it.
MENU
English version