Table of Contents
Advertisement
C
o
n
n
e
c
t
i
n
g
I
/
O
C
o
n
n
e
c
t
i
n
g
I
/
O
The backplane of the mainboard has the following I/O ports:
PS/2 Mouse
PS/2 Keyboard
LPT1
COM1
VGA Port
1394a Port
Audio Ports
LAN Port
USB Ports
D
e
v
i
c
e
s
D
e
v
i
c
e
s
Use the upper PS/2 port to connect a PS/2
pointing device.
Use the lower PS/2 port to connect a PS/2
keyboard.
Use LPT1 to connect printers or other parallel
communications devices.
Use the COM ports to connect serial devices
such as mice or fax/modems. COM1 is identified
by the system as COM1/3.
Connect your monitor to the VGA port.
Use the 1394a port to connect any Firewire
device.
Use the three audio ports to connect audio
devices. The first jack is for stereo line-in signal.
The second jack is for stereo line-out signal. The
third jack is for microphone.
Connect an RJ-45 jack to the LAN port to
connect your computer to the Network.
Use the USB ports to connect USB devices.
Note: The USB port located below the
1394a port is shared with the USB3
connector.
25
Advertisement
Table of Contents
