Integrated Peripherals - Intel S651M User Manual

DRAM Addr/Cmd Rate (Auto Mode)
This option allows you to set the lead off DRAM read and write cycles. When
set to Delay 1T, memory read/write commands are sent one clock cycle
behind the memory address. When set to Normal, read/write and memory
address commands are sent simultaneously.
Press <Esc> to return to the Advanced Chipset Setup screen.
Prefetch Caching (Disabled)
Enables PCI slave prefetch caching. Enabling this increased performance.
Memory Hole at 15M-16M (Disabled)
This item is used to reserve memory space for ISA expansion cards that
require it.
AGP Aperture Size (128MB)
This item defines the size of the aperture if you use an AGP graphics adapter.
It refers to a section of the PCI memory address range used for graphics
memory. We recommend that you leave this item at the default value.

Integrated Peripherals

These options display items that define the operation of peripheral
components on the system's input/output ports.operation of peripheral
components on the system's input/output ports.
Phoenix – AwardBIOS CMOS Setup Utility
SIS OnChip IDE Device
SIS OnChip PCI Device
Onboard SuperIO Device
USB Controller
USB Ports Number
USB 2.0 Supports
USB Keyboard Support
Onboard LAN
Onboard LAN Boot ROM
IDE HDD Block Mode
Init Display First
AGP Auto Calibration
IDECHO Access Interface
IDECH1 Access Interface
USB0 Access Interface
USB1 Access Interface
USB2 Access Interface
USB2.0 Access Interface
Audio Access Interface
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Integrated Peripherals
[Press Enter]
[Press Enter]
Menu Level
[Press Enter]
[Enabled]
[6 Ports]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[PCI Slot]
[Enabled]
[EDB Bus]
[EDB Bus]
[EDB Bus]
[EDB Bus]
[EDB Bus]
[EDB Bus]
[EDB Bus]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
36
Item Help
F1:General Help