Adjustment; Steering Friction; Remote Control Lever Load - TOHATSU M 9.9 Owner's Manual

42

ADJUSTMENT

1. Steering friction

The steering friction can be adjusted
in accordance with your preference by
turning the steering adjusting bolt.
Lighter
Note
The steering adjust bolt is used to adjust
the sliding load of the steering, but not
to fix the steering. If excess tightning
given to the bolt may lead a cause of
8 damage to the swivel bracket.
�������
!
Do not overtighten the throttle grip
or remote control tensioner or it
could result in difficulty of movement
resulting in the loss of control causing
an accident and could lead to severe
injury.
Heavier

2. Remote control lever load

(Throttle friction adjustment screw)
To adjust the load of the remote
control lever, turn the throttle friction
adjustment screw on the front of
the remote control. Turn clockwise
to increase the load and counter-
clockwise to decrease it.
Lighter
Throttle friction
adjustment screw
Heavier