Stopping - TOHATSU M 9.9 Owner's Manual

4. Stopping

9.9D2, 15D2, 18E2 and EF type
Stop switch
Stop switch
lock
Hook
1 Turn the throttle grip to the slow
position.
2 Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed if it has been running at
full speed.
3 Push the stop switch to stop the
engine or release the stop switch
lock.
�������
!
• Do not shift into Reverse during
planing, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
• Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering
system and/or shifting mechanism
may be damaged.
ENGINE OPERATION
EP type
OFF
Stop switch
lock
(N)
1 Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has been
running at full speed.
2 Turn the main switch key to the OFF
position.
Notes
• After stopping the engine, close the
air vent screw on the tank cap.
• Disconnect the fuel connector of
the engine or the fuel tank.
• Disconnect the battery cable of the
EF or EP type engine, if the engine
will not be used for more than 3
days.
35
ON
5